 |
|
| Infaco products |
|
|
 |
| • ELECTROCOUP F3005 electronic pruning shear - Controlled power |
 |
|
|
 |
Discover the latest electronic pruning shear - ELECTROCOUP F3005.
|
 |
 |
 |
Viticulture
Vine pruning |
|
 |
 |
| Forestry work Tree pruning |
|
 |
 |
| Parkland Maintenance work |
|
|
|
|
The F3005 in viticulture
The new ELECTROCOUP F3005 is the ideal tool for vine pruning. It is the only pruning shear with the advantage of a half- aperture setting (35mm) on the device. This saves considerable time on all small and medium cutting operations (representing 70% to 80% of all pruning: spur or cane pruning).
The F3005 is the electronic pruning shear with the largest cutting capacity on the market, with an aperture of 56 mm.
The F3005 gives you the option of 2 operating modes :
>"Pulse" mode and "Controlled" mode.
> "Pulse" mode allows you to work at maximum speed, while "Controlled" mode gives extremely precise control of blade movement, according to the pressure exercised by your finger on the operating trigger.
Battery Autonomy can be up to 2 days work without recharging.
The F3005 in Orchards and Tree pruning
The F3005 is the reference in electronic pruning tools in arboriculture, thanks to its great cutting capacity, its power, and above all its accessories for high pruning.
The F3005 can be fitted with a range of telescopic extensions from 1.20 m . to 3.50 m . with the option of adding an extra extension of 1.80 m . giving access to branches 7.00 m . from the ground.
The pruning shear is controlled by a micro switch inserted in a glove worn by the user.
The F3005 in Parklands and Local councils
The F3005 is the new companion for local council and parkland maintenance agents.
Some local authorities now have over 50 appliances (eg: C.U.S. Strasbourg , France ).
The F3005's versatility means it can be used for all routine maintenance works and also on large-scale pruning operations.
|
|
| • ELECTROCOUP extension poles |
|
|
|
 |
The Extension poles are suitable for the F3005 and the R4005.
|
 |
|
 |
Forestry work
Tree pruning |
|
|
 |
Parkland
Maintenance work |
|
|
|
|
|
The ELECTROCOUP Extension Pole System
The system allows the operator to improve its work when pruning up high .The innovation within the systen is in its patented trigger activation system.The trigger system works with a micro switch inserted in a glove worn by the operator, allowing him to activate the trigger at any time and in any position.
The extension in a telescopic version or fixed version allows the operator to reach branches up to 7m from the ground.
The ELECTROCOUP Extension Pole has been awarded twice at the prestigeous Trade Show Sival 2006 and the Sifel 2006 for best innovation.
Thanks to its Extension Pole, Infaco SAS has position itself as a professional equipment supplier in both the Forestry and Parkland maintenance industries.
|
|
| • The MAXICOUP R4005 lopper - special large cuts |
|
|
|
 |
The MAXICOUP R4005 lopper
is the ideal tool for cutting vines and trees before top grafting operations.
|
|
|
 |
Viticulture
Cutting back and cleaning vines |
|
|
 |
Forestry, lopping
Maintenance, forestry work |
|
|
 |
Parkland
Maintenance, diverse pruning operations |
|
|
|
|
The Maxicoup in viticulture
The R4005 complements the F3005 pruning shear (it can be connected to the same battery) for large cutting operations. (All lopping and cleaning works).
Thanks to its high cutting capacity, the R4005 can be used for cuts of up to 60 mm .
The Maxicoup in Orchards and Tree lopping
The R4005 is the best tool for large cuts. Thanks to its wide opening ( 100 mm ), it is capable of cutting branches of 60 mm diameter.
Its smooth and clean cuts are less vulnerable to disease than pruning wounds caused by chainsaws.
|
|
| • The Electric Sharpener A48V |
|
|
|
 |
|
The Electric Sharpener A48V has been made to be plug in directly to your F3005 or R4005 battery pack. This Electric sharpener will save the operator a considerable time in its daily sharpening operations. The A48V comes with a choice of interchangeable devices for diverse type of work (soft sharpening, blade shaping,…).
|
|
|
|
|
| • The A3M tying device |
|
|
|
 |
The A3M is an electrical tying device that will increase dramatically your speed in vine tying.
|
|
|
|
The A3M in viticulture
The A3M is an electrical tying device that makes vine tying easy. For single or double "Guyot" (cane) training, tying down or "Cordon de Royat" (cordon) training, this machine is highly versatile. A soft steel wire is used for greater flexibility. Strong enough to hold until harvesting, it self-destructs easily after a year, at pruning time.
It is available in several diameters 0 .40mm - 0.46mm - 0.50mm - 0.56mm - 0.45mm stainless steel (for Cordons).
The simplicity of the system makes it the most economical on the market. The coil allows over 1000 ties (for the 0.40mm).
Machine tying-in time is less than 0.4 second.
Battery autonomy is 8,000 ties.
|
|
| • Accessories |
|
|
|
 |
|
The Electropulv
The ELECTROPULV is an electric sprayer available in 2 sizes (11l. or 18l.).
Its purpose is to replace the traditional manual backpack sprayer. The Electropulv operate with a constant pressure (from 3,5 bar up to 4,2 bar) from the start to finishing a tank.
A simple push of the trigger replace the tiring motion of the manual pumping.
The Electropulv is compact and can be used also where the larger sprayer can not have access. The sprayer can also be adapted to 48V to be used with Electrocoup battery pack. . |
|
 |
|
Safety Tipped Gloves
Gloves in genuine leather with an extra layer of suede on the palm. Wool lining to protect from the cold weather. All finger tips are protected during the operation of mecanical pruning. The steel inserts resist to a pressure up to 20 bars.
Average weight of the pair : 285g. |
|
|
|
 |
|
|
|
|
|
|
Importers section
INFACO 
Infaco products
Electronic pruning shear
Electric tying device
Electro'liv 
Electronic lopper
Extension poles
& Sharpener
Vine pruning (Australia - 2004 - 2,8 Mb)
